Top Menu

Heritage Classic E106C Garage Door

More info in the details below:

Order Now
Category:

Description

CONSTRUCTION

Heritage Classic garage doors are constructed using West Coast kiln-dried Hem/Fir heavy stile and rails, tongue & groove (T&G) weather joint at meeting rails and Polystyrene core. On the E-Series, Luan Mahogany Plywood is pressure laminated to both sides of the frame. A 3/4″ thick wood overlay is applied to the door face to create the design, the C-Series has an addition layer of T&G material applied to the door face prior to the application of the overlay design. The overlay material is back cut with 1/8″ grooves to help resist cupping or warping before it is applied to the door. All windows are true divided; if overlay is an arched pattern, the tops of the windows are also arched.

NOMINAL SPECIFICATIONS

  • Thickness: Frame: 1-1/8″ | Face material: 1/4″ | Overlay: 3/4″
  • Overall door thickness: 2-3/8″
  • Stiles: End: 5-1/2″ | Center: 10
  • Rail: Bottom: 7-1/2″ | Top: 5-1/2″ | Meeting rail width combined: 5″
  • Arches: Doors up to 10′ wide: standard radius of 15’0″ radius.
    Door width 10’+: single 58’0″ radius or two 15’0″ radius arches (double arches)
  • Calculated insulation rating: R Value=6.18
  • Finish: Face sanded, ready for finishing
  • Warranty: One-year manufacturer limited warranty

OPTIONS

  • Widths up to 20′, heights up to 14′, in one inch increments (180 max. sq. ft. total)
  • Stain grade with no putty
  • Custom arches (an exact radius must be specified or a template provided)
  • Decorative hardware
  • 25,000-, 50,000- and 100,000-cycle torsion springs
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass
  • Low-clearance, high-lift or vertical-lift track and hardware also available

HARDWARE

The standard Heritage Classic Garage Door is equipped with:

  • Heavy-duty 15″ radius torsion hardware
  • 2” track
  • Verticals are angle mounted, horizontal track has continuous reinforcing angle
  • 3″ track supplied when required by weight
  • Long-stem 10 ball bearing rollers with nylon races
  • Non-corrosive door fixtures
  • Graduated 14-gauge double-end hinges
  • All doors include one strut per section—2-1/4″ or 3″, depending door width and weight

Additional information

Width

8'0", 9'0", 16-0", 18'0"

Height

7'0", 8'0", 9'0", 10'0", 11'0", 12’0", 14'0" For ease of operation, do not exceed 28” section height

Reviews

There are no reviews yet.

Be the first to review “Heritage Classic E106C Garage Door”

Product Inquiry