Top Menu

Heritage Classic C203S Garage Door

More info in the details below:

Order Now



Heritage Classic garage doors are constructed using West Coast kiln-dried Hem/Fir heavy stile and rails, tongue & groove (T&G) weather joint at meeting rails and Polystyrene core. A 3/4″ thick wood overlay is applied to the door face to create the design, the C-Series has an addition layer of T&G material applied to the door face prior to the application of the overlay design. The overlay material is back cut with 1/8″ grooves to help resist cupping or warping before it is applied to the door. All windows are true divided; if overlay is an arched pattern, the tops of the windows are also arched.


  • Frame thickness: 1-1/8″ | Face material thickness: 1/4″ | Overlay thickness: 3/4″
  • Overall door thickness: 3-1/4″
  • Stiles: End: 5-1/2″ | Center: 10
  • Rail: Bottom: 7-1/2″ | Top: 5-1/2″ | Meeting rail width combined: 5″
  • Arches: Doors up to 10′ wide: standard radius of 15’0″ radius.
    Door width 10’+: single 58’0″ radius or two 15’0″ radius arches (double arches)
  • Calculated insulation rating: R Value=6.18
  • Finish: Face sanded, ready for finishing
  • Warranty: One-year manufacturer limited warranty


  • Widths up to 20′, heights up to 14′, in one inch increments (180 max. sq. ft. total)
  • Stain grade with no putty
  • Custom arches (an exact radius must be specified or a template provided)
  • Decorative hardware
  • 25,000-, 50,000- and 100,000-cycle torsion springs
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass
  • Low-clearance, high-lift or vertical-lift track and hardware also available


The standard Heritage Classic Garage Door is equipped with:

  • Heavy-duty 15″ radius torsion hardware
  • 2” track
  • Verticals are angle mounted, horizontal track has continuous reinforcing angle
  • 3″ track supplied when required by weight
  • Long-stem 10 ball bearing rollers with nylon races
  • Non-corrosive door fixtures
  • Graduated 14-gauge double-end hinges
  • All doors include one strut per section—2-1/4″ or 3″, depending door width and weight

Additional information


8'0", 9'0", 16-0", 18'0"


7'0", 8'0", 9'0", 10'0", 11'0", 12’0", 14'0" For ease of operation, do not exceed 28” section height


There are no reviews yet.

Be the first to review “Heritage Classic C203S Garage Door”

Product Inquiry